I am would like to count up all of the different objects in a model, but I cannot find a command that will do this. Is there a method that I am overlooking or anything that returns a count?
Rhino does not have a command that will return how may of each type of object exists in a model. But, with RhinoScript, you can write your own. The following sample script will do this, for example:
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' RhinoCountObjects.rvb -- December 2007
' If this code works, it was written by Dale Fugier.
' If not, I don't know who wrote it.
' Works with Rhino 4.0.
Option Explicit
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' Counts all objects
Sub CountAllObjects
Dim objects, obj
objects = Rhino.AllObjects(False,True)
If IsArray(objects) Then
Call DoCounting(objects, True)
Else
Rhino.Print "No objects to count."
End If
End Sub
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' Counts selected objects
Sub CountSelectedObjects
Dim objects
objects = Rhino.GetObjects("Select objects to count", 0, True, True)
If IsArray(objects) Then
Call DoCounting(objects, False)
End If
End Sub
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' Do the counting
Sub DoCounting(objects, bTotal)
If Not IsArray(objects) Then Exit Sub
' Declare constants
Const rhPoint = 1
Const rhPointCloud = 2
Const rhCurve = 4
Const rhSurface = 8
Const rhPolysrf = 16
Const rhMesh = 32
Const rhLight = 256
Const rhAnnotation = 512
Const rhBlock = 4096
Const rhTextDot = 8192
Const rhGrip = 16384
Const rhDetail = 32768
Const rhHatch = 65536
Const rhMorph = 131072
Const rhCage = 134217728
Const rhPhantom = 268435456
Const rhClip = 536870912
' Declare variables
Dim points : points = 0
Dim pointclouds : pointclouds = 0
Dim curves : curves = 0
Dim surfaces : surfaces = 0
Dim polysrfs : polysrfs = 0
Dim meshes : meshes = 0
Dim lights : lights = 0
Dim annotations : annotations = 0
Dim blocks : blocks = 0
Dim textdots : textdots = 0
Dim grips : grips = 0
Dim details : details = 0
Dim hatches : hatches = 0
Dim morphs : morphs = 0
Dim cages : cages = 0
Dim phantoms : phantoms = 0
Dim clips : clips = 0
Dim obj
' Count them
For Each obj In objects
If Not Rhino.IsObjectReference(obj) Then
Select Case Rhino.ObjectType(obj)
Case rhPoint points = points + 1
Case rhPointCloud pointclouds = pointclouds + 1
Case rhCurve curves = curves + 1
Case rhSurface surfaces = surfaces + 1
Case rhPolysrf polysrfs = polysrfs + 1
Case rhMesh meshes = meshes + 1
Case rhLight lights = lights + 1
Case rhAnnotation annotations = annotations + 1
Case rhBlock blocks = blocks + 1
Case rhTextDot textdots = textdots + 1
Case rhGrip grips = grips + 1
Case rhDetail details = details + 1
Case rhHatch hatches = hatches + 1
Case rhMorph morphs = morphs + 1
Case rhCage cages = cages + 1
Case rhPhantom phantoms = phantoms + 1
Case rhClip clips = clips + 1
End Select
End If
Next
' Report them
If (bTotal = True) Then
Rhino.Print "Total object count = " & CStr(UBound(objects) + 1)
Else
Rhino.Print "Selected object count = " & CStr(UBound(objects) + 1)
End If
If (points > 0 ) Then Rhino.Print " Points = " & CStr(points)
If (pointclouds > 0 ) Then Rhino.Print " Point clouds = " & CStr(pointclouds)
If (curves > 0 ) Then Rhino.Print " Curves = " & CStr(curves)
If (surfaces > 0 ) Then Rhino.Print " Surfaces = " & CStr(surfaces)
If (polysrfs > 0 ) Then Rhino.Print " PolySurfaces = " & CStr(polysrfs)
If (meshes > 0 ) Then Rhino.Print " Meshes = " & CStr(meshes)
If (lights > 0 ) Then Rhino.Print " Lights = " & CStr(lights)
If (annotations > 0 ) Then Rhino.Print " Annotations = " & CStr(annotations)
If (blocks > 0 ) Then Rhino.Print " Blocks instances = " & CStr(blocks)
If (textdots > 0 ) Then Rhino.Print " Text dots = " & CStr(textdots)
If (grips > 0 ) Then Rhino.Print " Grip objects = " & CStr(grips)
If (details > 0 ) Then Rhino.Print " Detailed views = " & CStr(details)
If (hatches > 0 ) Then Rhino.Print " Hatches = " & CStr(hatches)
If (morphs > 0 ) Then Rhino.Print " Morph objects = " & CStr(morphs)
If (cages > 0 ) Then Rhino.Print " Cage objects = " & CStr(cages)
If (phantoms > 0 ) Then Rhino.Print " Phantoms objects = " & CStr(phantoms)
If (clips > 0 ) Then Rhino.Print " Clipping planes = " & CStr(clips)
End Sub
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' Add this script to the list of scripts to load at startup
Rhino.AddStartupScript Rhino.LastLoadedScriptFile
' Define command aliases
Rhino.AddAlias "CountAllObjects", "_-RunScript (CountAllObjects)"
Rhino.AddAlias "CountSelectedObjects", "_-RunScript (CountSelectedObjects)"
Using the PropertyListBox to display the results use the following:
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' RhinoCountObjects.rvb -- December 2007
' If this code works, it was written by Dale Fugier modified by Brenton Pryer January 2008
' If not, I don't know who wrote it.
' Works with Rhino 4.0.
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Option Explicit
Dim tempObjs : tempObjs = rhino.SelectedObjects(True)
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
If IsNull(tempObjs) Then
Call CountAllObjects
Else
Call CountSelectedObjects(tempObjs)
End If
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Sub CountAllObjects
Dim objects, obj
objects = Rhino.AllObjects(False,True)
If IsArray(objects) Then
Call DoCounting(objects, True)
Else
Rhino.Print "No objects to count."
End If
End Sub
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' Counts selected objects
Sub CountSelectedObjects(tempObjects)
Dim objects
objects = tempObjects
If IsArray(objects) Then
Call DoCounting(objects, False)
End If
End Sub
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' Do the counting
Sub DoCounting(objects, bTotal)
If Not IsArray(objects) Then Exit Sub
Dim objNames(17)
Dim objValues(17)
Dim i
' Declare variables
objNames(0) = "All Objects"
objNames(1) = "Points"
objNames(2) = "Point Clouds"
objNames(3) = "Curves"
objNames(4) = "Surfaces"
objNames(5) = "Poly Surfaces"
objNames(6) = "Meshes"
objNames(7) = "Lights"
objNames(8) = "Annotations"
objNames(9) = "Blocks"
objNames(10) = "TextDots"
objNames(11) = "Grips"
objNames(12) = "Details"
objNames(13) = "Hatches"
objNames(14) = "Morphs"
objNames(15) = "Cages"
objNames(16) = "Phantoms"
objNames(17) = "Clips"
' Declare RhObjects
Dim rhPoint : rhPoint = 1
Dim rhPointCloud: rhPointCloud = 2
Dim rhCurve : rhCurve = 4
Dim rhSurface : rhSurface = 8
Dim rhPolysrf : rhPolysrf = 16
Dim rhMesh : rhMesh = 32
Dim rhLight : rhLight = 256
Dim rhAnnotation: rhAnnotation = 512
Dim rhBlock : rhBlock = 4096
Dim rhTextDot : rhTextDot = 8192
Dim rhGrip : rhGrip = 16384
Dim rhDetail : rhDetail = 32768
Dim rhHatch : rhHatch = 65536
Dim rhMorph : rhMorph = 131072
Dim rhCage : rhCage = 134217728
Dim rhPhantom : rhPhantom = 268435456
Dim rhClip : rhClip = 536870912
' Declare variables
Dim points : points = 0
Dim pointclouds : pointclouds = 0
Dim curves : curves = 0
Dim surfaces : surfaces = 0
Dim polysrfs : polysrfs = 0
Dim meshes : meshes = 0
Dim lights : lights = 0
Dim annotations : annotations = 0
Dim blocks : blocks = 0
Dim textdots : textdots = 0
Dim grips : grips = 0
Dim details : details = 0
Dim hatches : hatches = 0
Dim morphs : morphs = 0
Dim cages : cages = 0
Dim phantoms : phantoms = 0
Dim clips : clips = 0
Dim obj
' Count them
For Each obj In objects
If Not Rhino.IsObjectReference(obj) Then
Select Case Rhino.ObjectType(obj)
Case rhPoint points = points + 1
Case rhPointCloud pointclouds = pointclouds + 1
Case rhCurve curves = curves + 1
Case rhSurface surfaces = surfaces + 1
Case rhPolysrf polysrfs = polysrfs + 1
Case rhMesh meshes = meshes + 1
Case rhLight lights = lights + 1
Case rhAnnotation annotations = annotations + 1
Case rhBlock blocks = blocks + 1
Case rhTextDot textdots = textdots + 1
Case rhGrip grips = grips + 1
Case rhDetail details = details + 1
Case rhHatch hatches = hatches + 1
Case rhMorph morphs = morphs + 1
Case rhCage cages = cages + 1
Case rhPhantom phantoms = phantoms + 1
Case rhClip clips = clips + 1
End Select
End If
Next
' Declare variables for PryerperyListBox
objValues(0) = CStr(CStr(UBound(objects) + 1))
objValues(1) = CStr(points)
objValues(2) = CStr(pointclouds)
objValues(3) = CStr(curves)
objValues(4) = CStr(surfaces)
objValues(5) = CStr(polysrfs)
objValues(6) = CStr(meshes)
objValues(7) = CStr(lights)
objValues(8) = CStr(annotations)
objValues(9) = CStr(blocks)
objValues(10) = CStr(textdots)
objValues(11) = CStr(grips)
objValues(12) = CStr(details)
objValues(13) = CStr(hatches)
objValues(14) = CStr(morphs)
objValues(15) = CStr(cages)
objValues(16) = CStr(phantoms)
objValues(17) = CStr(clips)
rhino.PropertyListBox objNames, objValues, "Documents Object Count", "Object Count"
End Sub