The following sample code demonstrates how to use the CArgsRhinoSweep1 class and the RhinoSweep1 SDK function. The definitions of these can be found in rhinoSdkSweep.h.
Note, this example does not perform any curve sorting or direction matching. This is the responsibility of the the SDK developer.
CRhinoCommand::result CCommandTest::RunCommand( const CRhinoCommandContext& context )
{
CRhinoGetObject go;
go.SetCommandPrompt( L"Select rail curve" );
go.SetGeometryFilter( CRhinoGetObject::curve_object );
go.GetObjects(1,1);
if( go.CommandResult() != success )
return go.CommandResult();
const CRhinoObjRef& rail_ref = go.Object(0);
const CRhinoObject* rail_obj = rail_ref.Object();
if( !rail_obj )
return failure;
const ON_Curve* rail_crv = rail_ref.Curve();
if( !rail_crv )
return failure;
CRhinoGetObject gx;
gx.SetCommandPrompt( L"Select cross section curves" );
gx.SetGeometryFilter( CRhinoGetObject::curve_object );
gx.EnablePreSelect( false );
gx.EnableDeselectAllBeforePostSelect( false );
gx.GetObjects(1,0);
if( gx.CommandResult() != success )
return gx.CommandResult();
CRhinoPolyEdge edge;
edge.Create( rail_crv, rail_obj );
CArgsRhinoSweep1 args;
args.m_rail_curve = edge.Duplicate();
args.m_bHaveRailPickPoint = false;
args.m_bClosed = rail_crv->IsClosed();
args.m_bUsePivotPoint = false;
int i;
for( i = 0; i < gx.ObjectCount(); i++ )
{
const CRhinoObjRef& obj_ref = gx.Object(i);
const ON_Curve* crv = obj_ref.Curve();
if( crv )
{
ON_Curve* dup_crv = crv->DuplicateCurve();
double t = 0;
edge.GetClosestPoint( dup_crv->PointAtStart(), &t );
args.m_shape_curves.Append( dup_crv );
args.m_rail_params.Append( t );
args.m_shape_objrefs.Append( obj_ref );
}
}
// Start and end points
args.m_bUsePoints[0] = 0;
args.m_bUsePoints[1] = 0;
// Point objects picked for endpoints
args.m_bClosed = false;
args.m_style = 0;
args.m_planar_up = ON_zaxis; // Don't need this, but set it anyway..
args.m_simplify = 0; // Simplify method for shape curves
args.m_rebuild_count = -1; // Sample point count for rebuilding shapes
args.m_refit_tolerance = context.m_doc.AbsoluteTolerance();
args.m_sweep_tolerance = context.m_doc.AbsoluteTolerance();
args.m_angle_tolerance = context.m_doc.AngleToleranceRadians();
args.m_miter_type = 0; // 0: don't miter
ON_SimpleArray<ON_Brep*> breps;
if( RhinoSweep1(args, breps) )
{
for( i = 0; i < breps.Count(); i++ )
{
context.m_doc.AddBrepObject( *breps[i] );
delete breps[i];
}
}
// Clean up
delete args.m_rail_curve;
for( i = 0; i < args.m_shape_curves.Count(); i++ )
delete args.m_shape_curves[i];
context.m_doc.Redraw();
return success;
}
Public Overrides Function RunCommand(ByVal context As RhinoCommandContext) _
As IRhinoCommand.result
Dim go As New MRhinoGetObject()
go.SetCommandPrompt("Select rail curve")
go.SetGeometryFilter(IRhinoGetObject.GEOMETRY_TYPE_FILTER.curve_object)
go.GetObjects(1, 1)
If (go.CommandResult() <> IRhinoCommand.result.success) Then
Return go.CommandResult()
End If
Dim rail_ref As MRhinoObjRef = go.Object(0)
Dim rail_obj As IRhinoObject = rail_ref.Object()
Dim rail_crv As IOnCurve = rail_ref.Curve()
If (rail_obj Is Nothing Or rail_crv Is Nothing) Then
Return IRhinoCommand.result.failure
End If
Dim gx As New MRhinoGetObject()
gx.SetCommandPrompt("Select cross section curves")
gx.SetGeometryFilter(IRhinoGetObject.GEOMETRY_TYPE_FILTER.curve_object)
gx.EnablePreSelect(False)
gx.EnableDeselectAllBeforePostSelect(False)
gx.GetObjects(1, 0)
If (gx.CommandResult() <> IRhinoCommand.result.success) Then
Return gx.CommandResult()
End If
Dim edge As New MRhinoPolyEdge()
edge.Create(rail_crv, rail_obj)
Dim args As New MArgsRhinoSweep1()
args.m_rail_curve = edge.Duplicate()
args.m_bHaveRailPickPoint = False
args.m_bClosed = rail_crv.IsClosed()
args.m_bUsePivotPoint = False
Dim curves As New System.Collections.Generic.List(Of OnCurve)()
For i As Integer = 0 To gx.ObjectCount() - 1
Dim obj_ref As MRhinoObjRef = gx.Object(i)
Dim crv As IOnCurve = obj_ref.Curve()
If (crv IsNot Nothing) Then
Dim dup_crv As OnCurve = crv.DuplicateCurve()
Dim t As Double = 0
edge.GetClosestPoint(dup_crv.PointAtStart(), t)
curves.Add(dup_crv)
args.m_rail_params.Append(t)
args.m_shape_objrefs.Append(obj_ref)
End If
Next
args.m_shape_curves = curves.ToArray()
' Start and end points
args.m_bUsePoints(0) = 0
args.m_bUsePoints(1) = 0
' Point objects picked for endpoints
args.m_bClosed = False
args.m_style = 0
args.m_planar_up = New On3dVector(OnUtil.On_zaxis)
args.m_simplify = 0 'Simplify method for shape curves
args.m_rebuild_count = -1 'Sample point count for rebuilding shapes
args.m_refit_tolerance = context.m_doc.AbsoluteTolerance()
args.m_sweep_tolerance = context.m_doc.AbsoluteTolerance()
args.m_angle_tolerance = context.m_doc.AngleToleranceRadians()
args.m_miter_type = 0 '0: don't miter
Dim breps() As OnBrep = Nothing
If (RhUtil.RhinoSweep1(args, breps)) Then
For Each b As OnBrep In breps
context.m_doc.AddBrepObject(b)
Next
End If
context.m_doc.Redraw()
Return IRhinoCommand.result.success
End Function
public override IRhinoCommand.result RunCommand(IRhinoCommandContext context)
{
MRhinoGetObject go = new MRhinoGetObject();
go.SetCommandPrompt( "Select rail curve" );
go.SetGeometryFilter( IRhinoGetObject.GEOMETRY_TYPE_FILTER.curve_object );
go.GetObjects(1,1);
if( go.CommandResult() != IRhinoCommand.result.success )
return go.CommandResult();
MRhinoObjRef rail_ref = go.Object(0);
IRhinoObject rail_obj = rail_ref.Object();
IOnCurve rail_crv = rail_ref.Curve();
if( rail_obj == null || rail_crv == null )
return IRhinoCommand.result.failure;
MRhinoGetObject gx = new MRhinoGetObject();
gx.SetCommandPrompt( "Select cross section curves" );
gx.SetGeometryFilter( IRhinoGetObject.GEOMETRY_TYPE_FILTER.curve_object );
gx.EnablePreSelect( false );
gx.EnableDeselectAllBeforePostSelect( false );
gx.GetObjects(1,0);
if( gx.CommandResult() != IRhinoCommand.result.success )
return gx.CommandResult();
MRhinoPolyEdge edge = new MRhinoPolyEdge();
edge.Create( rail_crv, rail_obj );
MArgsRhinoSweep1 args = new MArgsRhinoSweep1();
args.m_rail_curve = edge.Duplicate();
args.m_bHaveRailPickPoint = false;
args.m_bClosed = rail_crv.IsClosed();
args.m_bUsePivotPoint = false;
System.Collections.Generic.List<OnCurve> curves =
new System.Collections.Generic.List<OnCurve>();
for( int i=0; i<gx.ObjectCount(); i++ )
{
MRhinoObjRef obj_ref = gx.Object(i);
IOnCurve crv = obj_ref.Curve();
if( crv != null )
{
OnCurve dup_crv = crv.DuplicateCurve();
double t = 0;
edge.GetClosestPoint( dup_crv.PointAtStart(), ref t );
curves.Add( dup_crv );
args.m_rail_params.Append( t );
args.m_shape_objrefs.Append( obj_ref );
}
}
args.m_shape_curves = curves.ToArray();
// Start and end points
args.set_m_bUsePoints(0, 0);
args.set_m_bUsePoints(1, 0);
// Point objects picked for endpoints
args.m_bClosed = false;
args.m_style = 0;
// Don't need this, but set it anyway..
args.m_planar_up = new On3dVector(OnUtil.On_zaxis);
args.m_simplify = 0; // Simplify method for shape curves
args.m_rebuild_count = -1; // Sample point count for rebuilding shapes
args.m_refit_tolerance = context.m_doc.AbsoluteTolerance();
args.m_sweep_tolerance = context.m_doc.AbsoluteTolerance();
args.m_angle_tolerance = context.m_doc.AngleToleranceRadians();
args.m_miter_type = 0; // 0: don't miter
OnBrep[] breps = null;
if( RhUtil.RhinoSweep1( ref args, out breps ) )
{
for( int i=0; i<breps.Length; i++ )
context.m_doc.AddBrepObject( breps[i] );
}
context.m_doc.Redraw();
return IRhinoCommand.result.success;
}